E-bike battery passport: obligations from 2027
The short answer
From 18 February 2027, every e-bike propulsion battery that is a “light means of transport battery” (“LMT battery”) and is placed on the EU market or put into service needs a battery passport (Article 77(1) of Regulation (EU) 2023/1542). Such a battery is sealed, weighs 25 kg or less and is designed to power wheeled vehicles. There is no minimum capacity. The obligation lies with the economic operator that places the battery on the market or puts it into service, also when the battery is built into the e-bike or sold as a replacement. That operator also uploads the battery’s unique identifier to the EU registry (Article 77(10)). The passport is opened through a QR code that, as a rule, is on the battery itself.
This article is general information, not legal advice. Confirm your role for each product with a lawyer or the competent market surveillance authority.
Last updated: 20 November 2026.
Which batteries are LMT batteries – and why the 2 kWh threshold does not apply
Article 3(1), point (11), defines an LMT battery as a battery that is sealed, weighs 25 kg or less and is specifically designed to provide electric power for the traction of wheeled vehicles that can be powered by an electric motor alone or by a combination of motor and human power. This includes type-approved vehicles of category L under Regulation (EU) No 168/2013, as long as the battery is not an electric vehicle battery.
In practice this means:
- Pedelecs, electric cargo bikes and e-scooters: their traction batteries of up to 25 kg are LMT batteries.
- Category L vehicles such as speed pedelecs: a traction battery of up to 25 kg is an LMT battery; a heavier one is an electric vehicle battery (Article 3(1), point (14)). Both need a battery passport from 18 February 2027.
- Batteries that do not power the vehicle, for example for lights or a display, are not LMT batteries. At 5 kg or less they are normally portable batteries (Article 3(1), point (9)), for which no battery passport is required.
The 2 kWh threshold quoted in many articles applies only to industrial batteries. Article 77(1) requires a passport for each LMT battery, each industrial battery with a capacity greater than 2 kWh and each electric vehicle battery. For an e-bike battery, what matters is therefore not its capacity but whether it meets the definition of an LMT battery.
Who provides the battery passport in the e-bike supply chain
The passport is provided by the economic operator that places the battery on the market or, where it has not previously been placed on the market, puts it into service (Article 3(1), point (18)): it attributes the unique identifier and ensures that the information is accurate, complete and up to date (Article 77(3) and (4)). Placing on the market means the first making available of a battery on the Union market (Article 3(1), point (16)), and the Regulation expressly also applies to batteries incorporated into products (Article 1(3)). For typical situations in the e-bike industry, this gives:
| Situation | Who places the battery on the market? | Basis |
|---|---|---|
| A battery pack maker in the EU assembles packs from cells and markets them under its own name | the pack maker, as manufacturer | Art. 3(1)(33) |
| A bicycle brand buys finished packs from a maker that has already placed them on the EU market | the pack maker; the bicycle brand only makes the battery available further down the chain | Art. 3(1)(16) |
| A bicycle brand has the packs made and markets them under its own name or trademark | the bicycle brand, as manufacturer | Art. 3(1)(33) |
| Batteries or complete e-bikes come from a third country | the importer established in the EU | Art. 3(1)(64), Art. 1(3) |
| Replacement batteries placed on the market separately from 18 February 2027 | whoever places the replacement battery on the market or puts it into service; each battery gets its own passport. What counts is the first placing on the market of each unit: a unit already placed on the market before 18 February 2027 does not trigger the obligation when it is resold later | Art. 3(1)(16), Art. 77(1) and (3) |
| A battery after preparation for re-use, preparation for repurposing, repurposing or remanufacturing | whoever places it on the market or puts it into service again; it gets a new passport linked to the original passport, where one exists – according to the Commission, also when the battery was first placed on the market before 18 February 2027 | Art. 77(7) |
The responsible operator may give written authorisation to another operator to act on its behalf (Article 77(4)), for example the battery supplier that already holds the data. What each role involves is explained in Who must create the battery passport?
What is different in an e-bike battery passport
- Data: the information in Annex XIII is included to the extent applicable to the battery category (Article 77(2)); the capacity threshold for exhaustion (point 1(k)) is only for electric vehicle batteries. Not everything is required from day one: in February 2027, information on carbon footprint and recycled content is not yet required, and battery due diligence applies from 18 August 2027 (Article 48(1), as amended by Regulation (EU) 2025/1561), and only to economic operators subject to it – Article 47 exempts operators with a net turnover below EUR 40 million that are not part of a group exceeding that limit. Data generated during use may still be empty when a new battery is first placed on the market (Commission Q&A on the battery passport). All data points by battery category are listed in our battery passport checklist.
- State of health: since 18 August 2024, the parameters for determining the state of health and expected lifetime must be contained in the battery management system of LMT batteries (Article 14(1)). For LMT batteries they include the remaining capacity and, where possible, the remaining power capability (Annex VII, Part A). In the passport these values are accessible only to persons with a legitimate interest (Annex XIII, point 4). According to the Commission, the state-of-health requirements apply only where the battery has a battery management system.
- Performance and durability: since 18 August 2024, LMT batteries must be accompanied by a document with the values of the electrochemical performance and durability parameters in Annex IV, Part A (Article 10(1)).
- Carbon footprint: the carbon footprint declaration applies to LMT batteries from 18 August 2028 or 18 months after the delegated act or the implementing act enters into force, whichever is later (Article 7(1)). The performance class label follows no earlier than 18 February 2030 (Article 7(2)), the maximum threshold no earlier than 18 August 2031 (Article 7(3)).
Removability and replaceability from 18 February 2027
Article 11 applies from the same day as the battery passport (Article 96(2)(a)). Anyone placing on the market products that incorporate LMT batteries – that is, the e-bike – must ensure that:
- the batteries and the individual battery cells in the battery pack are readily removable and replaceable by an independent professional at any time during the lifetime of the product (paragraph 5);
- the battery can be substituted by another compatible battery without affecting the functioning, performance or safety of the vehicle (paragraph 6);
- replacement batteries are available as spare parts for at least five years after the last unit of the equipment model – that is, the last e-bike of that model – is placed on the market, at a reasonable and non-discriminatory price for independent professionals and end-users (paragraph 7);
- no software impedes replacement with another compatible battery or compatible key components (paragraph 8).
Proposed change: under the Commission’s simplification proposal Omnibus VIII (procedure 2025/0397(COD)), paragraph 5 would refer to modules instead of individual battery cells. The Council adopted its negotiating mandate in June 2026; on 20 November 2026 the European Parliament’s procedure file still showed “awaiting committee decision”. Until an amendment is adopted, the current text with individual cells applies.
The battery passport supports these duties: for persons with a legitimate interest and the Commission, it contains part numbers for components, contact details of sources for replacement spares and dismantling information (Annex XIII, point 2). Which persons have a legitimate interest is to be specified by the Commission in implementing acts (Article 77(9)).
From e-bike battery to QR label: the steps
- Clarify your role for each battery model. Do you place the battery on the market or put it into service yourself, or has your supplier already placed it on the market? The table above helps.
- Request the data from your cell or pack supplier: composition and chemistry, the performance and durability values under Annex IV, the state-of-health parameters in the battery management system and the EU declaration of conformity.
- Give every battery a unique identifier. The passport is reached through an identifier attributed by the economic operator; the QR code and the identifier must comply with ISO/IEC 15459-1 to 15459-6 or equivalent standards (Article 77(3)). AkkuPass uses GS1 Digital Link with the model’s GTIN and the serial number of the pack.
- Put the QR code on the battery. It is printed or engraved visibly, legibly and indelibly on the battery; only where this is not possible or not warranted on account of the nature and size of the battery must it be affixed to the packaging and to the documents accompanying the battery (Article 13(7)). It must be in high contrast and readable with a common smartphone (Annex VI, Part C).
- Publish the passport and print the labels. In AkkuPass you set up the battery model once, add the serial numbers by form, import or API and print the QR labels. The full process is described in Battery passport platform: features explained.
- Upload the identifier to the EU registry. The economic operator placing the battery on the market or putting it into service uploads the unique identifier of each battery to the EU digital product passport registry (Article 77(10), added by Article 78 of Regulation (EU) 2024/1781). AkkuPass prepares the data for registration. Once registration of batteries is available, you complete it in the EU registry’s web application and record the result in AkkuPass.
- Check the result. This is how the public passport of an e-bike battery looks after scanning: the sample passport with invented data for an e-bike battery.
Frequently asked questions
Does the 2 kWh threshold apply to e-bike batteries?
No. The 2 kWh threshold applies only to industrial batteries. LMT batteries need a battery passport from 18 February 2027 regardless of their capacity (Article 77(1)).
Does a replacement battery need its own battery passport?
Yes, if it is placed on the market or put into service from 18 February 2027. Every battery gets its own passport with its own identifier (Article 77(1) and (3)). A unit already placed on the market before that date needs no passport when it is resold.
Does the battery passport also apply to e-scooters and speed pedelecs?
Yes. Traction batteries of up to 25 kg are LMT batteries, also in type-approved category L vehicles. Heavier batteries for category L vehicles are electric vehicle batteries. In both cases a battery passport is required from 18 February 2027.
Does the QR code have to be on the battery itself?
As a rule, yes: it is printed or engraved visibly, legibly and indelibly on the battery. Only where this is not possible or not warranted on account of the nature and size of the battery must it be affixed to the packaging and to the documents accompanying the battery (Article 13(7)).
When does the carbon footprint declaration apply to LMT batteries such as e-bike batteries?
From 18 August 2028 or 18 months after the Commission’s acts on the calculation method and the format enter into force, whichever is later (Article 7(1)).
May software restrict battery replacement?
No. From 18 February 2027, software must not be used to impede the replacement of an LMT battery or its key components with another compatible battery or compatible key components (Article 11(8)).
Next step
Open the sample passport on your phone to see the public passport of an e-bike battery the way buyers and workshops see it. The data you need for your model is listed in the checklist. For an overview of the product, see the AkkuPass battery passport software page. To test your first e-bike batteries with your own data, apply for the pilot programme.